Hardware Overview
NOTE
1. The pin numbers for male DB9 and DB25 connectors,
and hole numbers for female DB9 and DB25
connectors are labeled
on the connector
. However, the
numbers are typically quite small, so you may need to
use a magnifying glass to see the numbers clearly.
2. The pin numbers for both 8-pin and 10-pin RJ45
connectors (and ports) are typically
not
labeled on the
connector (or port). Refer to the Pinout and Cable
Wiring diagrams below to see how RJ45 pins are
numbered.
RS-232 Connection
Moxa EtherDevice Server has one RS-232 (10-pin RJ45) console
port, located on the top panel. Use either an RJ45-to-DB9 or
RJ45-to-DB25 cable (see the cable wiring diagrams below) to
connect Moxa EtherDevice Server’s console port to your PC’s
COM port. You may then use a console terminal program, such as
Moxa PComm Terminal Emulator, to access Moxa EtherDevice
Server’s console configuration utility.
RJ45 (10-pin) Console Port Pinouts
MOXA EtherDevice Server Hardware Installation Guide
3-9
