- 17 -
“Turbo Ring V2” DIP Switch Settings
DIP 1
DIP 2
DIP 3
DIP 4
ON: Enables the
default “Ring
Coupling
(backup)” port.
ON: Enables this
EDS as the Ring
Master.
ON: Enables the
default “Ring
Coupling” port.
ON: Activates
DIP switches 1,
2, 3 to configure
“Turbo Ring V2”
settings.
OFF: Enables the
default “Ring
Coupling
(primary)” port.
OFF: This EDS
will not be the
Ring Master.
OFF: Do not use
this EDS as a
ring coupler.
OFF: DIP
switches 1, 2, 3
will be disabled.
NOTE
You must enable the Turbo Ring function first before using the DIP
switch to activate the Master and Coupler functions.
NOTE
If you do not enable any of the EDS-600 switches to be the Ring
Master, the Turbo Ring protocol will automatically choose the
EDS-600 with the smallest MAC address range to be the Ring
Master. If you accidentally enable more than one EDS-600 to be
the Ring Master, these EDS-600 switches will auto-negotiate to
determine which one will be the Ring Master.
LED Indicators
The front panel of the EDS-600 contains several LED indicators. The
function of each LED is described in the following table:
LED
Color
State
Description
Main System
On
Power is being supplied to power input
PWR1.
PWR1
AMBER
Off
Power is
not
being supplied to power
input PWR1.
On
Power is being supplied to power input
PWR2.
PWR2
AMBER
Off
Power is
not
being supplied to power
input PWR2.
On
When the corresponding PORT alarm is
enabled, and a user-configured event is
triggered.
FAULT
RED
Off
When the corresponding PORT alarm is
enabled and a user-configured event is
not triggered, or when the corresponding
PORT alarm is disabled.
MSTR/
HEAD
GREEN
On
When the EDS-600 is set as the Master
of the Turbo Ring
or is set as the Head of
the Turbo Chain.
