DA-683 Series
Hardware Installation
The default IP addresses and netmasks of the Gigabit LAN ports are as follows:
Default
IP
Address
Netmask
LAN 1
192.168.3.127
255.255.255.0
LAN 2
192.168.4.127
255.255.255.0
LAN 3
192.168.5.127
255.255.255.0
LAN 4
192.168.6.127
255.255.255.0
LAN 5
192.168.7.127
255.255.255.0
LAN 6
192.168.8.127
255.255.255.0
NOTE
Please note that the XPE models use DHCP.
Connecting Digital Input/Output Channels
The DA-683 computer comes with 4 digital input channels and 4 digital output channels located on the rear
panel. These DI/DO channels can be connected with the terminal block. See the following figures for the
locations of the DI/DO channels and the wiring methods.
DI x 4, DO x 4
(Terminal Block)
Digital Input Dry Contact Wiring
Digital Input Wet Contact Wiring
Digital Output Wiring
Upgrading the Memory Module
The DA-683 embedded computer supports one 200-pin DDR2 667 SODIMM module of up to 2 GB. One DDR2
SDRAM memory module is pre-installed. To upgrade the DDR2 SDRAM memory module, follow these
instructions:
2-12
