PCI Express Boards
Software Installation
3-11
Non-Windows Drivers
Drivers are provided for DOS, Linux, and SCO.
DOS
Moxa DOS API-232 is a software package that assists users in developing new programs, or debugging existing
programs for serial communications. This section explains how to install the package, how to set up the driver,
and how to load or unload the driver.
Moxa provides drivers that allow you to use the following serial board products for DOS:
•
PCI Express Boards:
CP-102E, CP-102EL, CP-132EL, CP-132EL-I CP-104EL-A, CP-114EL, CP-114EL-I,
CP-118EL-A, CP-168EL-A, CP-118E-A-I, CP-138E-A-I, CP-134EL-A-I, CP-116E-A
WARNING
If you are using a Serial ATA HDD for DOS, the installation process will hang. To prevent the installation process
from hanging, change your HDD to an IDE drive.
NOTE
The following procedure shows how to install the CP-168EL driver for DOS.
Installing the Driver
1.
Run the installation program,
DOSINST.EXE
from the
\Software\DOS
folder on the Documentation and
Software CD. Specify the target API-232 directory (e.g.,
) to which the driver will be copied. Press
F2 to start the installation.
www.ipc2u.ru
www.ipc2u.com
www.moxa.pro
