Moxa Technologies CP-102N-T, Быстрое руководство по установке

Страница: 8 / 8

- 8 -
Software Installation Information
1. Get the driver at www.moxa.com . Based on the OS type, choose
the corresponding driver.
2. Installing the driver:
•
For Windows OS (Take the installation of Win7 as an example)

Unzip and execute the .exe file

Follow the instructions to install the drivers
• For Linux
Execute the following commands from the Linux prompt:

Get the driver at www.moxa.com and unzip the file:
#cd /
#mkdir moxa
#cd moxa
#cp /<driver
directory>/driv_linux_smart_<version>_build_<build_dat
e>.tgz.
#tar -zxvf
driv_linux_smart_<version>_build_<build_date>.tgz

Install the driver:
#cd mxser
#./mxinstall
DIP Switch Setting
On OFF (Default)
SW1 Enable 120-ohm termination
resistor Disable termination resistor
SW2 1K-ohm pull-high/low
resistors 150K-ohm Pull-high/low resistors
SW3 Reserved for future feature
SW4 Reserved for future feature
Pin Assignments
Male DB9
Pin RS-232
RS-422/
RS-485-4W
RS-485-2W
1 DCD TxD- (A) –
2 RxD TxD- (B) –
3 TxD RxD+ (B) Data+ (B)
4 DTR RxD- (A) Data- (A)
5 GND GND GND
6 DSR – –
7 RTS – –
8 CTS – –