-
5
-
STEP 2:
Mounting the
AWK-3121B
to a wall requires 4 screws. Use
the
AWK-3121B
device, with wall-mounting plates
attached, as a guide to mark the correct locations of
the 4 screws. The heads of the screws should be 6.0
mm in diameter, and the shafts should be less than 3.5
mm in diameter, as shown in the figure at the right.
Do not drive the screws in all the way—leave a space of about 2 mm to
allow room for sliding the wall-mount panel between the wall and the
screws.
NOTE
Test the screw head and shank size by inserting the screw into
one of the keyhole shaped apertures of the wall-mounting
plates before driving the screws into the wall.
STEP 3:
Once the screws are
driven
into the wall, insert the
four screw heads
through the large opening of the
keyhole-shaped apertures in the wall-
mount
plates, and then slide the
AWK-3121B
downwards, as indicated
to
the right. Tighten the four screws
for added stability.
DIN-Rail
Mounting (Optional)
The
DIN-rail mounting method is used in industrial or railway
application. You will require a DIN-rail attachment plate, which is an
optional accessory, to mount the
AWK-3121B
to a DIN rail. When
you attach the
DIN-rail attachment plate to the
AWK-3121B
, make
sure that the stiff metal spring is
situated towards the top as shown
in the following instructions:
STEP 1:
Attached
the
DIN-rail
mounting
plates
to
the
AWK-3121 B
with
the
M4
screws
in
the
accessory
package.
M4 screws specification
for Wall Mounting Kit
:
