Before first use, please make sure the device is fully charged. If not, just need to connect the USB adaptor or
connect to Computer by USB cable, then you can charge.
The first two times please keep charging about 6 hours, after that you just need to charge 4 hours.
【
Remark
】
: This tablet using Built-in polymer battery, Charge must choose.
standard adaptor (Input: AC110~240V 50/60Hz Max:180MA.. Output: DC5.0~5.5V/1.5-2A)
During the charging, the battery icon will scroll or have flashing indicate in battery icon.
When finish charging, battery icon will become green and stop rolling.
In order to prolong the service life of the machine, you are advised to use up the battery power to about 15%
before charging it.
【
Remarks
】
:
a. If you don’t to use this Tablet for long time, in order to avoid no power damage, please charge/play the device
once a month.
b. After shut down for low battery, connect USB adaptor, device will remind low battery, need to wait some time
until the battery is enough power to enter into main menu.
c. Device charging should be in standby status for normal charging time.
Because with device and screen power consumption, it may cause longer charging time.
2.2 Connection with PC
Use USB cable to connect device to PC.
The unit is a “generic USB Device” and does not need any extra
software drivers to connect to your PC. After your PC has recognized the unit, you will see a message on the
bottom of your PC screen informing you. (If your PC warns: Drivers not installed, ignore this)