Movincool Classic Plus 14, Руководство по обслуживанию

Страница: 21 / 46

ELECTRICAL SYSTEM
16
Fan Motor
CF1 (White)
CF2 (Brown/White)
J5 Low (Red)
J6 High (Black)
Ground
(Green/Yellow)
3. Fan Motor
The fan motor is a single phase, induction
type two-speed motor. The motor rotates
fans on the evaporator side and the con-
denser side at the same time.
Specifications: Rated Voltage: 115 volts 60 Hz
Rated Output – High – 243 watts
Low – 188 watts
UL Listed File Number – E-49807
NOTE: An internal overload relay is used to protect
the fan motor. This relay is built into the fan motor
and will interrupt the flow of current when there is
an overcurrent situation or if abnormally high
temperature builds up in the fan motor.
4. Compressor Motor
The compressor motor is a single phase
motor. It is contained within the same hous-
ing as the compressor.
Specifications: Rated Voltage 115 volts
Rated Output 800 Watts
5. Compressor Overload Relay
An external compressor overload relay is used
to protect the compressor motor. This relay is
mounted within the connector housing that
attaches to the top of the compressor. The
relay will interrupt the flow of current when
there is an overload caused by a high tem-
perature condition in the compressor.
Specifications:
Temperature Variance Trip Time
(seconds)
Contacts Open 284˚F / 140˚C ± 41˚F / ± 5˚C
Contacts Closed 165˚F / 74˚C ± 48˚F / ± 9˚C
2 – 12