58
04/2007
MOVIECAM COMPACT Mk2
3 – THE MOVIECAM ACCESSORIES
59
04/2007
MOVIECAM COMPACT Mk2
3 – THE MOVIECAM ACCESSORIES
EXCHANGING THE MASK
In order to exchange a mask, first the accessory bracket
has to be removed.
Caution!
• When removing the accessory plug, everything
must be extremely clean; no dirt must get into
the opening. Take care not to lose the four
screws.
• Care must be taken as the Mask is sensible to
scratches.
The Mask is mounted and removed with the MOVIE-
CAM COMBITOOL. When mounting the Mask, care
must be taken that it is inserted until it touches the buffer.
Below the removed accessory bracket is a strip of ela-
stic material which fixes the Mask in its position.
▲
Notice
The rental houses offer a large variety of various for-
mats and format combinations, such as [Super 35/
1 : 1/85 & TV]. When collecting the equipment,
care should be taken that the right slide (suitable to
the ground glass) is available.
The Mask MOVIELITE module is activated with the rota-
ry knob
[A]
. This knob, which is no on/off switch, is a
dimmer that changes the brightness of the luminous fra-
mes from light to extinguish. In the small window
[B]
the
slide marks can be read and the brightness checked.
HANDLING THE MASKS
fig.3/5
[A]
[B]
OPERATING THE MASK MOVIELITE
fig.3/6
