16
To activate the Last Memory Function,
press the SETUP button to access the
General Setup Page. Press the SELEC-
TION button to access the Last Memory
submenu. Press the SELECTION button
to highlight "On". Confirm your selection by
pressing the ENTER button. To exit this
menu, press the SETUP button.
Set Last Memory Function
The DVD player can identify the last format
of the disc being used to store the last
frame shown in its memory prior to unit
being powered off. This function memo-
rizes the point at which the disc was
stopped. The disc can be removed from
the unit. Then if the same disc is loaded
again, play will resume from the point at
which it was stopped, providing that no
other disc of the same format was loaded
in the interim.
The DVD player memorizes the two differ-
ent disc formats (DVD and CD). Each type
of disc can be stopped, removed from the
tray and play can be resumed without
affecting the memory function of the other
two disc formats. If the DVD player is con-
nected to the vehicle's lighter socket, the
last memory function will only operate
when the DVD is powered off by the power
button on the remote control or from the
power button on the unit's front panel.
System Setup
General Setup Page
On
On
Off
Off
LAST MEMORY
ON
LAST MEMORY
ON
Set Last Memory Function
TV DISPLAY
PS
TV DISPLAY
PS
ANGLE MARK
ON
ANGLE MARK
ON
OSD LANGUAGE
ENG
OSD LANGUAGE
ENG
CAPTIONS
OFF
CAPTIONS
OFF
SCREEN SAVER
ON
SCREEN SAVER
ON
MV-DVD-PL2-UM.qxp 2/10/06 15:13 Page 16
