manualshive.com logo in svg

MOVEK myMix, Руководство пользователя

Поделиться
Скачать
MOVEK myMix Скачать руководство пользователя страница 4

4 

Declaration of Conformity (for USA)

Model Number:

myMix

Type of Equipment:

Professional Audio Recording and Mixing Device

Responsible Party:

MOVEK, LLC

Address:

6517 Navaho Trail, Edina, Minnesota, 55439, U.S.A.

Telephone Number : 

1 (952) 657-7889

This device complies with Part 15 of the FCC Rules. Operation is subject to the following 
two conditions: (1) this device may not cause harmful interference, and (2) this device must 
accept any interference received, including interference that may cause undesired 
operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B 
digital device, pursuant to part 15 of the FCC rules.  These limits are designed to provide 
reasonable protection against harmful interference in a residential installation.  This 
equipment generates, uses and can radiate radio frequency energy and, if not installed and 
used in accordance with the instructions, may cause harmful interference to radio 
communications.  However, there is no guarantee that interference will not occur in a 
particular installation. If this equipment does cause harmful interference to radio or television 
reception, which can be determined by turning the equipment off and on, the user is 
encouraged to try to correct the interference by one or more of the following measures:
a) Reorient or relocate the receiving antenna.
b) Increase the separation between the equipment and receiver.
c) Connect the equipment into an outlet on a circuit different from that to which the receiver 
is connected.
d) Consult the dealer or an experienced radio/TV technician for help.

CAUTION
Changes or modifications to this equipment not expressly approved by the manufacturer for 
compliance could void the user's authority to operate this equipment.

INFORMATION ON SD/SDHC CARDS

u

(SDA) 2.0 specifications. SD cards not compliant to this spec will not be recognized in myMix, 
and  will  generate  an  error  message.  If  in  doubt,  check  on 

  for 

recommended SD/SDHC media.

u

   Before you use an SD/SDHC card with myMix it needs to be formatted. Insert the card in 

myMix and use the FORMAT SD card function under the ADMINISTRATION menu (see page 
22).

u

   Do not remove the SD/SDHC card while the unit is reading or writing data. Doing so may 

result in corrupted data on the card as well as damaging the myMix unit.

u

   Ensure that dust and debris do not collect in the card terminal.

u

  Do not place the SD/SDHC card near a heat source, or leave it exposed to high temperature 

and high humidity.

In order to work with myMix, SD/SDHC cards need to be compliant with SD Card Assoc. 

www.myMixaudio.com

Содержание myMix





























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды