Page 4
S c r e e n D i s p l a y a n d M e n u S t r u c t u r e
When the torque tester is turned on it will display a
Screen similar to that below for 5 seconds and then
go into Reading Mode.
EZtorQ II
Version 1.03
Sensor Model:
EZtorQ 100i
Serial Number:
EZ-09-05-007
The Reading Mode Screen will appear as shown
below:
Track
+0.0000
Lbf.in
Menu
The Menu key is used to access the available menu items. The scroll keys allow scrolling through various menu items.
The Enter key is used to select a menu item and is also used to clear readings from the display if the unit is in Manual
Clear mode.
Scroll keys
It is recommend securing the torque tester to a work-
bench before operating. Immobilizing the analyzer is
critical for the safety of the operator as well as for the
accuracy of torque measurements during operation.
Mounting the unit to a fixed surface offers the most
secure way to immobilize the analyzer, and is
recommended when used at a permanent location. It
employs two spring loaded mounting screws from the
unit into the mounting surface.
Note:
Remember that a loose torque tester during utilization can impact the validity of torque readings. Always make
sure the unit is secure before operating, as repeated usage may loosen the screws.
Loosen both
black caps to
access
mounting
screw.
M O U N T I N G
Corporate Headquarters:
1080 North 11th Street, San Jose, CA 95112 Phone: (408) 292-2214 Fax: (408) 292-2733
www.mountztorque.com