BFA-Series & NFA-Series Operation Instructions
Corporate Headquarters:
1080 North 11th Street, San Jose, CA 95112 Phone: (408) 292-2214 Fax: (408) 292-2733
www.mountztorque.com
Page 4
Speed Selection for Electric Screwdriver
These models feature an adjustable RPM setting on the tool. The RPM settings can be adjusted to the preset increments as shown
label (see image above).
These models also feature a selectable Soft Start mode (from 0.2, 0.4 & 0.6 seconds).
How to Adjust Speed Setting
1. Press and hold the Speed button for 2 seconds.
2. Two LEDs will display colors that show the current speed selection of the brushless screwdriver.
3. Position the F/R slide switch in R or F to increase (+) or decrease (-) RPM setting of the tool Slide switch to "R" position to
increase speed. Slide switch to "F" to decrease speed. Then press the Speed button until the target speed is selected. The two
LEDs will display colors that show the current speed selection (see table below for reference)
Note!
The RPM settings can only be
adjusted to the preset increments as shown on the label (see chart below).
4. By starting the screwdriver, the selected speed is saved automatically.
Speed Selection Chart
