ASSEMBLY STEPS
02
STEP 1: Attach Arm Assembly to Wall
OPTION A: Wood Stud Installation
ø 4.5mm
(ø 3/16")
55mm
(2.2")
X
W-C W-A
Caution:
Do not use anchor in drywall
or wood
！
A
A
Locate your studs. Verify and mark
Position the Arm Assembly (A) at your
desired height and line up the holes
with your stud center line. Level the
Arm Assembly (A) and mark the pilot
hole locations.
Drill pilot holes using a ø3/16 in.
(ø4.5 mm) diameter drill bit.
Install Arm Assembly (A) using lag
bolts (W-A) and washers (W-C).
Tighten the lag bolts until they are
Assembly (A).
No!