Note
：
Be sure to keep the arm in
horizontal position during
adjustment. Or else it would
be difficult to adjust the
mount or damage the mount.
STEP 5 : Adjust Tension
For proper functioning of this mount, depending on different weight of monitor you might need to adjust
tension in gas spring arm (A) using 6 mm Allen Key (N).
07
N
N
CAUTION
A
M
Clockwise ("-" direction) reduces tension,
counter clockwise("+" direction) increase
tension. The tension should be just enough
to hold your monitor in place without lifting
itself up.
Note:
When tilted, if the monitor sags or
does not stay, please fasten the tilting bolt
on the mount until the monitor can be held
at any angle as needed
Refer to above illustrations to adjust
the level of tightness of the arms.
+
-
M
If necessary, refer to above illustrations
to adjust the level of tightness of the
arms.
