mTune Quick Start Guide v1.0
mountune mTune Quick Start Guide
STOP! To maintain any warranty provision otherwise entitled to you and to ensure correct
operation and reliability, calibrations loaded via an mTune handset must be installed together with
the correct mountune hardware. Installation must be carried out at a Ford Dealer or mountune USA
to ensure vehicle warranty coverage- See warranty document for details.
Product Introduction
Congratulations on the purchase of the mTune hand held device. The mTune is an OEM ECU
flashing and engine-monitoring device that will flash the ECU with an engine calibration map.
mountune maps were developed to specifically to work in concert with the mountune hardware from
the Ford Focus ST MP275 and the mountune Ford Fiesta ST MP215 Upgrade Packages. By flashing
the ECU with the mountune map, this will ensure the engine performs as intended and maintain its 50
state legal emissions status. The mTune can:
•
Reprogram the factory engine control unit (ECU) with a mountune map through the on-board
diagnostic (OBD-II) port
•
Monitor and log vehicle sensor data using on-screen digital gauges
•
Read and clear engine diagnostic trouble codes (DTCs)
•
Measure 0-60mph,
¼
mile times, and generate a dyno plot
•
Estimate instantaneous fuel economy
Supported Vehicle List
o
2013-2014 Ford Focus ST
o
2014 Ford Fiesta ST
o
2015 Ford Fiesta ST
In-Box Contents
mTune
OBD-II Cable
USB Cable
(USB 2.0 A to Micro B)
