Please charge the device prior to first use. The indicator light will keep flashing
while the battery is running low.
Long press to turn on/off the device, or click to switch among 3 different
modes (low speed, high speed, low/high speed interchanging). The indicator
light will flash when the mode is switched.
While the device is on, long press to turn on/off the heating function (the
indicator light will turn red if the heating function is on), click to turn on/off
vibrating, or double click to turn on/off red light.
Please use a 5V/1A charger (not included) to charge this device.
Please keep the device dry before charging, otherwise it may cause malfunction.
Please keep the massage claws in a folded state for a proper charge
，
to avoid
charging failure.
It will take about 2 hours to fully charge the device and each full charge could
sustain about 1 hour of use. Deviations might occur depending on different
factors (such as temperature and massage speed).
When the battery is running low, the indicator light will flash 3 times, then the
device will enter sleep mode; During the charge, the self-protection function will
be activated and the product will stop working, with the indicator light in
breathing mode. The indicator light will remain steadily on after the product is
fully charged.
Control Panel
Operation Instruction
Vibrating / Heat Function / Red Light
Power On Key / Mode Switch
Long press: Heating function on / off
Click: Vibrating on / off
Long press: Power on / off
Click: Mode switching
Double click: Red light on / off
