Step 5
Adjust the tilting angles (from
+0°
to
-8°):
Hold and pull TV to your desired angle, you may need to loose the
safety screws a bit for the large tilting angle adjustment. And please
remember to fasten the bracket bolts with Allen key after the
adjustment.
Step 4
Two people are recommended
to hold and position the TV .
Hang the TV on the wall plate---Make sure the tilting angle is 0°:
Please pre-tighten the inner side tilting bolts before hanging the
TV on the wall plate.
Hang the top hooks of the brackets over the top bar of the wall
mount. Make sure the hooks securely lock in the bar ( figure 1).
Then attach the lower ends of the brackets to the lower bar of
the wall mount.
When TV is at the desired place, fasten safety
screws
①
with a screwdriver until screws tightly lock the wall bar.
figure 1
figure 2
Tips:
Do not fasten the safety screws too much for easy
adjustment of tilting.
①
Attention: Cables are
highly recommended to
plug before hang the TV
on the wall plate.
⑧