•
Before sawing with carbon steel
saw blades in wood, particle board,
building materials, etc., check
these for foreign objects such
as nails, screws, or similar.
R
emove foreign objects
or use bimetal
saw
blades.
S
craping
•
Select a high oscillation rate
and work at a flat angle with light pressure. Otherwise the scraper can
cut into surface.
S
anding
•
Removal rate is determined by the choice of sanding sheet, oscillation rate and applied pressure.
•
Pay attention to apply uniform sanding pressure; this increases
the working life of the sanding
sheets.
Do not exert too much pressure on the tool.
•
Regularly check the condition of the sanding sheet. Replace when necessary.
•
On very uneven surfaces, start with a coarse grit and gradually change to a fine grit for smooth finish
.
•
Always use
suitable sanding paper for the material being worked on (wood, steel, paint etc.).
•
For precise spot
-
sanding of edges and corners it is possible to work with just the tip or edge of
sanding plate.
32
Содержание PATRIOT OB0250
Страница 2: ...2...
