4. Power tool
use and care
a)
Do not force the power tool. Use the correct power tool for your application.
The correct power
tool will do the job better and safer at the rate for which it was designed.
b)
Do not use the power tool if the switch does not turn it on and off.
Any power tool that cannot be
controlled with the switch is dangerous and must be repaired.
c)
Disconnect the plug from the power source and/or the battery pack from the power tool before
making any adjustments, changing accessories, or storing power tools.
S
uch preventive safety
measures reduce the risk of starting the power tool accidentally.
d)
Store idle power tools out of the reach of children and do not allow persons unfamiliar with the
power tool or these instructions to operate the power tool.
Power tools
are dangerous in the hands
of untrained users.
e)
Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and
any other condition that may affect the power tool’s operation. If damaged, have the power tool
repaired before use.
Many accidents are caused by poorly maintained power tools.
f)
Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
g)
Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into
account the working conditions and the work to be performed.
Use of the power tool for
operations different from those intended could result in a hazardous situation.
h)
Keep handle dry, clean and free from oil and grease.
Slippery handles do not allow for safe handling
and control of the tool in unexpected situations.
5. Service
a)
Have your power tool serviced by a qualified repair person using only identical replacement parts.
This will ensure that the safety of the power tool is maintained.
ADDITIONAL SAFETY RULES FOR POLISHER AND SANDER
Collective safety warnings for polishing and sanding:
a)
This power tool is intended to function as a polisher and sander. Read all safety warnings,
instructions, illustrations and specifications provided with this power tool.
Failure to follow all the
instructions may result in electric shock, fire and/or serious injury.
b)
This power tool is not suitable for
grinding, wire brushing abrasive cutting
-
off.
Operations for
which
the power tool was not designed may create a hazard and cause personal injury.
c)
Do not use accessories which are not specifically designed and recommended by the tool
manufacturer.
Just because the accessory can be attached to your power tool, it does not assure
safe operation.
d)
The rated speed of the accessory must be at least equal to the maximum speed marked on the
power tool.
Accessories running faster than their rated speed can break and fly apart.
e)
The outside diameter and the thickness of your accessory must be within the capacity rating of
your power tool.
Incorrectly sized accessories cannot be adequately guarded or controlled.
f)
Threaded mounting of accessories must match the power tool
spindle thread. For accessories
mounted by flanges, the arbour hole of the accessory must fit the locating diameter of the flange.
Accessories that do not match the mounting hardware of the power tool will run out of balance,
vibrate excessively and may cause loss of control.
g)
Do not use a damaged accessory. Before each use inspect the
accessories such as abrasive wheels
for chips and cracks, backing
pads for cracks, tear or excess wear, wire brushes for loose or
cracked
wires. If power tool or accessory is dropped, inspect for
damage or install an undamaged
accessory. After inspecting and
installing an accessory, position yourself and bystanders away
from
28
Содержание PATRIOT LE1100
Страница 2: ...2...
