EN - 15
12. WARRANTY COVERAGE
The warranty covers all material and
manufacturing defects. The user must
follow all the instructions provided in
the accompanying documentation.
The warranty does not cover damage caused by:
•
Failure to familiarise oneself with the
documentation accompanying the machine.
• Carelessness.
•
Incorrect or prohibited use or assembly.
• Use of non-genuine spare parts.
• Use of accessories not supplied or
approved by the manufacturer.
The warranty does not cover:
•
Normal wear and tear of consumables,
such as cutting means, safety bolts.
•
Normal wear and tear.
The purchaser is protected by his or her own
national legislation. The purchaser’s rights under
the national laws or his or her own country are
not in any way restricted by this warranty.
13. MAINTENANCE TABLE
Task
Frequency
Paragraph
First time
And then every
MACHINE
Check all fasteners
-
Before each use
7.9
Safety checks/check controls
-
Before each use
6.2
General cleaning and inspection
-
Cleaning the exhaust area
7.4
Lubricating angle transmission
-
Cleaning the exhaust area
7.8
ENGINE
General cleaning and inspection
-
Cleaning the exhaust area
7.4
Cleaning the air filter
15 hours / at end of
every season
7.5
Cleaning the spark plug
-
15 hours / every season
7.7
Replace spark plug
-
100 hours / every season
7.7
Checking/topping up fuel level
-
Before each use
7.3.
14. PROBLEM IDENTIFICATION
PROBLEM
PROBABLE CAUSE
REMEDY
1.
The engine will not start
or will not keep running
Incorrect starting procedure.
Follow the instructions (see chapter 6.3)
Dirty spark plug or incorrect
distance between the electrodes
Check the spark plug (see par. 7.7).
Air filter clogged
Clean and/or replace the filter (see par. 7.5).
Carburation problems
Contact the authorised assistance centre.
2. The engine starts
but lacks power.
Air filter clogged
Clean and/or replace the filter (see par. 7.5).
Carburation problems
Contact the authorised assistance centre.
3. The engine runs
irregularly and lacks
power when revved
Dirty spark plug or incorrect
distance between the electrodes
Check the spark plug (see par. 7.7).
Carburation problems
Contact the authorised assistance centre.
4.
The engine makes
too much smoke
Incorrect composition of
the fuel mixture
Prepare the fuel mixture according
to the instructions (see par. 7.2)
Carburation problems
Contact the authorised assistance centre.
If problems persist after having performed the above operations, contact your dealer.