
34
SHARPENING WEDGE
TROUBLE SHOOTING
This log splitter is equipped with reinforced splitting wedge which blade is specially treated, after long
periods of operation, and when required; sharpen the wedge using a fine-toothed file removing any
burrs or flat spots on the edge.
PROBLEM
PROBABLE CAUSE
REMEDY SUGGESTED
Motor does not start
No current in the socket
Check mains fuse
Electrical extension line
defective
Unplug, Check and replace
Switch or capacitor defective
Have checked by Electrician
Log Splitter does not work
while motor running
Valve is not opened owing to
the connection parts loosening Check and tighten the parts
Control Levers or Connection
parts bent
Repair the bent parts
Lower hydraulic oil level
Check and refill hydraulic oil
Log Splitter works with abnor-
mal vibration and noise
Lower hydraulic oil level
Check and refill hydraulic oil
WIRING DIAGRAM
PLUMBING DIAGRAM