Mountfield HP42H Скачать руководство пользователя страница 10

10

LONG TERM - 

(if you are not using your mower for more than 28 days)

•  Give the machine a thorough clean, paying particular attention to the underside

•  Lubricate all moving parts

•  Empty the fuel tank either by running the mower out of fuel or tip the machine backwards and onto the back right wheel to 

drain the fuel into a suitable container. To drain the carburettor it is necessary to slacken the drain screw. The drain screw 

is situated under the carburettor on the float bowl (see diagram 4 in the engine manual). A bolt holds the bowl in place on 

the very bottom, but on an angle slighlty closer to you is another bolt with a red washer. This is the drain screw.

FAULT FINDING

PROBLEM

SOLUTION

Engine will not start

Check there is ample clean, fresh fuel in the tank. Any stale fuel needs to be drained 

from the machine.

Check the cutter blade is not fouling the ground preventing free rotation.

Engine will not stop

Check the Operator Presence Control (OPC) lever is fully released.

Remove spark plug lead to stop the engine using insulated gloves and refer to dealer.

Engine smokes

Engine may be overfilled with oil or may have been tipped.

Engine running unevenly Check the petrol filler cap isn’t too tight - it should only be finger tight. If fuel is over 28 

days old it has gone stale and will need replacing.

Failure to cut grass

properly

Stop the engine and disconnect the spark plug lead using heat resistant gloves.

Check blade attachment bolt is tight.

Check condition of blade.If seriously worn or damaged replace with a new one.

Failure to collect grass

properly

Stop the engine and disconnect the spark plug lead using heat resistant gloves

Check and make sure there is no build up of grass inside the casing.

Check grass collector is allowing air to flow through the fabric. If it is clogged

it should be washed carefully.

If the grass collector is not clogged raise the height of cut to increase airflow.

Check to ensure the engine is running at the correct speed (approximately from 

2,800rpm to 3,000rpm)

If conditions are too severe to use the grass collector, remove it and work with the 

deflector in position

Machine vibrates

excessively

This will certainly indicate that the blade has become badly damaged. Stop the engine, 

disconnect the spark plug lead and examine the blade assembly. Refer to your local dealer.

HELPLINE

0800 121 6585

or visit

www.servicelink.org.uk

This  product  is  supported  by  Service 

Link. If you have been unable to find the 

information  you  require  above  please 

call the Service Link helpline. Here you 

will  find  1-2-1  help  and  advice  from 

garden machinery repair specialists.

Service link

What is Service Link? 

Service Link is an aftersales help and 

advice  helpline  with  a  national  network  of  garden  machinery 

repair specialists.

How can we help you? 

Here at Service  Link   we   can   help   with   

all your trouble shooting, warranty, parts and service needs. 

Call us and speak to one of our advisors and if required, visit one 

of our 450 centres across the UK and Ireland.

How  can  you  contact  us? 

If  in  the  unlikely  event  that  this 

product  does  require  our  help  please  contact  the  helpline  on 

0800 121 6585 in the UK or 1800806149 in ROI.   Lines   are    

 open 

Monday-Saturday 9am to 5pm and Sundays 10am to 4pm. Also 

find us online at www.servicelink.org.uk.

Содержание HP42H













Отзывы: