Mountfield HP184 Скачать руководство пользователя страница 14

The following safety precautions must be observed at all times.  Please read them very carefully.

TRAINING

1) Read the instructions carefully. 

Get familiar with the controls and proper use of the equipment.

Learn how to stop the engine quickly.

2) Only use the lawnmower for the purpose for which it was designed, i.e. for cutting and collecting

grass. 

Any other use can be hazardous, causing damage to the machine. Examples of improper use

may include, but are not limited to:
–transport of people, children or animals on the machine;
–being transported by the machine;
–using the machine to tow or push loads;
–using the machine for leaf or debris collection;
–using the machine to trim hedges, or for cutting vegetation other than grass;
–use of the machine by more than one person;
–using the blade on surfaces other than grass.

3)

Never allow children or people unfamiliar with these instructions to use the lawnmower. Local
regulations may restrict the age of the operator.

4) Never use the lawnmower:

–When people, especially children, or pets are nearby.
–If the operator has taken medicine or substances that can affect his ability to react and concentrate.

5)

Remember that the operator or user is responsible for accidents or hazards occurring to other people
or their property.

6)  

 Never put your hands, feet or any implement under the cutter deck or inside the rear discharge

chute. The cutter  blade will continue to rotate for some time after the engine is switched off.

PREPARATION

1)    While mowing, always wear sturdy footwear and long trousers. Do not operate the equipment
      when bare foot or wearing open sandals. Avoid loose clothing that may snag on moving
      parts.
2)  

 Thoroughly inspect the area where the equipment is to be used and remove all objects which may

      be thrown by the machine or damage the cutter assembly and the engine (stones,sticks, metal
      wire,bones, etc.).

3)   WARNING: DANGER! Engine fuel is highly flammable:
    

  –Store fuel in containers specifically designed for this purpose.

      –Refuel using a funnel and outdoors only. Do not smoke while refuelling or whenever
      handling the fuel.
    

  –Add fuel before starting the engine. Never remove the cap ofthe fuel tank or add fuel while the

      engine is running or when the engine is hot.
      –If fuel is spilled, do not attempt to start the engine but move the machine away from the area of
     spillage and avoid creating any source of ignition until the fuel has evaporated andthe vapour
      dispersed.
      –Replace all fuel tanks and containers caps securely.

4)  

 Substitute faulty silencers.Never use the machine without a silencer.

5)   Before use, always inspect the machine, especially the condition of the blades, and check
      that the screws and cut-ting assembly are not worn or damaged.

      Replace worn ordamaged blades and screws in sets to preserve balance.

6)  

 Before mowing, attach the discharge opening guards (grass-catcher or stone-guard).

OPERATION

1)

Do not operate the engine in a confined space where dangerous carbon monoxide fumes can collect.

2)

Mow only in daylight or good artificial light.

3)

If possible avoid operating the equipment in wet grass.

4)

Always be sure of your footing on slopes.

5)

Walk, never run and do not allow yourself to be pulled along by the lawnmower.

6)   

Mow across the face of slopes, never up and down.

14

Содержание HP184





















Отзывы: