manualshive.com logo in svg

Mountfield 1435E, Руководство пользователя

Поделиться
Скачать
Mountfield 1435E Скачать руководство пользователя страница 14

14

EN

4.8 CUTTING HEIGHT ADJUSTMENT LEVER

There are seven positions for this lever (shown as «1» to «7» on the label), which corre-
spond to various heights between 3 and 8 cm.

– To go from one height to another, press the release button at the end of the lever.

4.9 LEVER FOR TIPPING THE GRASS-CATCHER  

( if 

present)

This pull-out lever tips and empties the grass-catcher. This means less work for the
operator.

4.21 CLUTCH / BRAKE PEDAL

This pedal has two functions: during the first part of its travel it acts as a clutch,
engaging and disengaging drive to the wheels, and in the second part it acts as a
brake on the rear wheels

Do not keep the pedal halfway between clutch engagement or

disengagement, as this can cause overheating and damage the transmission belt.

When the

machine is moving, keep your foot
off the pedal.

4.22 SPEED CHANGE LEVER

This lever has seven positions for
the 5 forward speeds, the neutral
position «N», and reverse «R». 

To go from one speed to another,
press the pedal (4.21) halfway and
shift the lever as shown on the
label.

Only shift into

reverse when the machine has
stopped moving.

!

WARNING!

NOTE

IMPORTANT

➤

Mechanical transmission

➤

CONTROLS AND INSTRUMENTS

4.22

4.21

5

R

2

3

4

N

1

Содержание 1435E









































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды