10. Press the
1
16
" balsa W4 and W5 parts into the
3
32
" balsa leading
edge W11 parts, as shown. Secure with thin CA, making sure the
parts are fully inserted and at a right angle to each other.
11. Trim off the bottom "tabs" on W11, so the bottom surface is
smooth.
W11
W4
W5
W5
W4
12. Slide the
1
16
" balsa W12 and W13 ribs onto the spars and
into the trailing edge assembly. Tack glue with thin CA,
making sure everything is fully inserted and aligned.
W13
W13
W12
Trim off tabs,
after assembly.
13. Slide the
1
16
" balsa W3 onto ribs. Make sure it is fully
aligned and tack glue with thin CA.
W3
