Instructions
Put the baby into the car seat and insert the safeguard in the front.
Meanwhile, pull the vehicle belt latch plate, route the vehicle shoulder and
lap belt through the belt guides on the two sides of the safeguard and lock
the vehicle belt latch plate into the belt buckle on the other side. Settle and
tighten the vehicle belt.
WARNING:
Check and ensure the FIX Connectors on the two sides has been locked cor-
rectly. Check and ensure the safeguard has been installed into the car seat
correctly and restrainted by the 3 point Vehicle Belt.
How to take the child out of the restraint
• Unfasten the vehicle seat belt, and open the safeguard.
• Take the child out of the restraint system.
• Fit the safeguard again and fasten the seat belt.
WARNING: Safeguard should always be secured in vehicle when not in use
.
Removing the restraint from the car (group 1)
• Unfasten the vehicle seat belt.
• Pass the seat belt through the guides on the safeguard and
remove it.
• Pinch the FIX Release Buttons on the two sides to release the
FIX Connectors.
• Take the restraint off the vehicle seat.
