HANDLE & AXLE ASSEMBLY
1. Remove protective packaging material. Remove the wheels and
other components that might be attached to the cart for transportation
purposes.
2. Unfold Shopping Cart (A) by releasing the latch located on the back side
of the cart.
3. Insert the Handle (B). Adjust the height of the desired handle by
positioning it on one of the three slots.
4. Slide Axle (C) through the holes located on each leg at the back side
of Shopping Cart (A). Center the axle and place two Cotter Pins (G) in the
holes on the inside of the back legs.
5. Use pliers (not included) to bend open the Cotter Pins (G) ends to secure
the axle in place.
WHEEL ASSEMBLY INSTALLATION
3
Follow the assembly steps below on one side of the axle.
1. Attach Washer (E), Spring (F) and Washer (E) on the axle, in the order
shown in the image below.
2. Attach Back Wheel (D) to the axle, followed by Washer (E).
3. Apply pressure on Spring (F) by pushing the Back Wheel (D) to the inside
of the axle until the outer hole on the axle is visible.
4. Attach Cotter Pin (G) on the outer hole to lock the wheel assembly in
place.
5. Use pliers (not included) to bend open the Cotter Pins (G) ends to secure
the axle in place.
6. Press the hub cap (H) onto the end of the axle to finish with wheel
assembly installation.
Follow steps 1 through 6 on the other side of the axle for the other wheel
assembly installation.
PACKAGE CONTENTS
Tools Needed: Pliers
2
This cart is intended for light duty use for groceries, laundry and
transporting sports, camping, gardening equipment. The cart is
rated for 66 lbs weight capacity of evenly distributed load.
Assembly Time:
Less than 10 minutes
lbs capacity
66
Shopping Cart
Handle
Axle
Back Wheel Washer
Spring
Cotter Pin Hub Cap
