Mount-It! MI-7610, Руководство по установке

Страница: 3 / 5

5
4
1.Insert the Grommet adapter #C into the slot that the C-clamp was just removed from.
2.Place the Grommet Bolt B through the center hole on the base as pictured and place the assembled
piece over the grommet hole on your desktop.
The grommet bolt is compatible with desktops up to 2.36” thick. For stable installation, the Wing nut #D
and the circular plate must be adequately engaged with the desk and the Grommet bolt #B
3. Position the circular plate on the Grommet bolt #B as shown (circular plate was removed from the
clamp assembly in the previous step). Tighten the assembly by attaching the Grommet Wing Nut #D to
the bottom of Grommet Bolt #B and tighten until secure.
4. Attach the Boom Arm E into the top of the now installed base.
Grommet Installation Continued
To install in the clamp configuration attach Clamp Assembly A to the desk in the desired location and
insert the Boom Arm E into the top of the clamp as pictured.
Option 1: Clamp Installation
1.To install in the grommet configuration, use a Philips head screwdriver and remove the bolt and nut
from the top of the Clamp Assembly A.
2.Pull out the C shaped bracket from the base .
3.Using the screwdriver, remove the screw from the end of the bolt to detach the circular plate attached
to it.
Option 2: Grommet Installation
Step 1
A
10
-6
0m
m
E
A
10
-6
0m
m
D
C
1
2
B
E