CAPTURE MODES
IV
MOTION DETECT MODE
Still photos are taken when an animal is detected. The number of photos taken when an animal is
detected is configurable in Settings. Photos are stored in the DCIM/100MFCAM folder on the SD card.
The M-990i offers four capture modes as described below. The default capture mode is Motion Detect.
HYBRID CAM MODE
Camera operates in Time Lapse mode during the day and Motion Detect Mode during the night.
Thirty minutes after dusk the camera will enter the Motion Detect Mode and take night photos
when the PIR sensor is triggered.
VIDEO MODE
Camera records a video when an animal is detected by the motion sensor. During daylight hours the
camera will record a video 5, 15 or 30 seconds in length. During the night, the camera will record a
video with a maximum length of 20 seconds. The video length is configurable in SETTINGS.
Page 4
M-990i Digital Game Camera
TIME LAPSE MODE
The camera takes photos at a specified interval during the day and combines them together to
create a Time Lapse Video (*.MLT file) which can be viewed on the supplied Moultrie Plot Stalker
software. The camera takes a Time Lapse Video twice a day; once in the morning and once in the
evening. The morning Time Lapse Video begins 15 min before sunrise. The evening Time Lapse Video
ends 15 min after sunset. See chart below as a reference. The length of each Time Lapse Video is
determined by the Time Lapse Duration setting in the camera menu. The camera will detect the
correct sunrise and sunset times automatically and adjust itself accordingly. The Time Lapse Videos
are stored in the DCIM/PLOT folder on the SD card.
IMPORTANT:
It will take the camera 24hrs to properly adjust to the correct sunrise and sunset times.
As a default, the camera will start the morning Time Lapse Video at 5:45am and end the evening video
at 6:15pm. To reset the sunrise and sunset times back to the default times, use the Default Settings
option in the menu.
NOTE:
The camera can still be triggered to take a photo under certain settings while in Time Lapse
mode. Please see the “Time Lapse Frequency” settings in the camera setup section.
TRAIL CAM MODE
Still photos are taken when an animal is detected. The number of photos taken
when an animal is detected is configurable in Settings. Photos are stored in
the in the DCIM/100MFCAM folder on the SD card.
PLOT CAM MODE
The camera takes photos at a specified interval during the day and combines
them together to create a Plot Video (*.MLT file) which can be viewed on the
supplied Moultrie Plot Stalker software. The camera takes a Plot Video twice
a day; once in the morning and once in the evening. The morning Plot Video
begins 15 min before sunrise. The evening Plot Video ends 15 min after
sunset. See chart below as a reference. The length of each Plot Video is
determined by the Plot Duration setting in the camera menu. The camera will
detect the correct sunrise and sunset times automatically and adjust itself
accordingly. The Plot Videos are stored in: DCIM/PLOT folder on the SD card.
IMPORTANT: It will take the camera 24hrs to properly adjust to the correct
sunrise and sunset times. As a default the camera will start the morning Plot
Video at 5:45am and end the evening video at 6:15pm. To reset the sunrise
and sunset times back to the default times, use the Default Settings option in
the menu.
The GameSpy offers four capture modes as described below.
The default capture mode is Trail Cam.
HYBRID CAM MODE
Camera operates in Plot Cam mode during the day and Trail Cam Mode during
the night. Thirty minutes after dusk the camera will enter the Trail Cam mode
and take night photos when the PIR sensor is triggered.
VIDEO MODE
Camera records a video when an animal is detected by the motion sensor.
During daylight hours the camera will record a video 5, 15 or 30 seconds in
length. During night the camera will record a video with a maximum length
of 10 seconds. The video length is configurable in SETTINGS.
4
CAPTURE MODES
NOTE: The camera can still be triggered to take a photo under certain settings
while in plot mode. Please see the "Plot Frequency" settings in the camera
setup section.
{
{
Morning Time Lapse Video
Evening Time Lapse Video
PlotStalker Software
M-880 GameSpy Digital Camera
Page 13
Page 4
PLOTSTALKER SOFTWARE INTRO
A
INTRODUCTION
In time-lapse photography a series
of still photos are taken at regular
time intervals. The PlotStalker
Software allows you to load the
time lapse file that was captured
from your Moultrie Game Camera
and scroll backward and forward
through your photos, single step,
search for activity in a designated
area, and save the files.
Computer: Intel® Pentium® 4 or AMD Athlon® 64 processor or above; 1GB
RAM minimum; 100 MB hard disk space minimum.
Operating System: Microsoft® Windows® 32 bit - XP with Service Pack 2 or
later; Windows Vista® Home Premium, Business, Ultimate, or Enterprise with
Service Pack 1; or Windows 7
Using standard Microsoft utilities (ex. File Explorer – My Computer),
copy the PlotFiles (extension is .MLT) from the PLOT directory on the
SD card to the hard disk drive in your computer. Note the location stored
on the hard disk drive.
Open the PlotStalker software application from the Windows Start Button
menu. Once in the PlotStalker software, click on the File Button
Browse to the location in which you have saved the Plot file(s)
(.MLT) in step 1 above, select the file of interest and click Open.
1
2
3
LOADING PLOT FILES
Insert the PlotStalker CD into your computer and follow on-screen instructions.
>
SYSTEM REQUIREMENTS
>
SOFTWARE INSTALLATION
BEGIN/END
Goes to the first or last photo in the Plot File.
FRAME BY FRAME SEARCH
Individually step forward or backward through each photo.
REWIND/PAUSE/PLAY
Play photos in sequence, pause, or play the photos in reverse order.
These functions simulate a video and are useful for manually searching
changes in the photos. When a sequence is being played, press
fast-forward or fast-rewind multiple times to increase speed. (1x-5x)
>
Page 13
Plot Stalker Software
PLOTSTALKER SOFTWARE INTRO
A
LOADING PLOT FILES
Using standard Microsoft utilities (ex. File Explorer – My Computer), copy the PlotFiles (extension is .MLT)
from the PLOT directory on the SD card to the hard disk drive in your computer. Note the location
stored on the hard disk drive.
Open the PlotStalker software application from the Windows Start Button menu.
Once in the PlotStalker software, click on the File Button Browse to the location
in which you have saved the Plot file(s) (.MLT) in step 1 above, select the file of
interest, and click Open.
BEGIN/END
Goes to the first or last photo in the Plot File.
FRAME BY FRAME SEARCH
Individually step forward or backward through each photo.
REWIND/PAUSE/PLAY
Play photos in sequence, pause, or play the photos in reverse order.
These functions simulate a video and are useful for manually searching
changes in the photos. When a sequence is being played, press
fast-forward or fast-rewind multiple times to increase speed. (1x-5x)
INTRODUCTION
In time-lapse photography a series
of still photos are taken at regular
time intervals. The PlotStalker
Software allows you to load the
time lapse file captured by your
Moultrie Game Camera and scroll
backward and forward through
your photos, search for activity
in a designated area, and
save the files.
TRAIL CAM MODE
Still photos are taken when an animal is detected. The number of photos taken
when an animal is detected is configurable in Settings. Photos are stored in
the in the DCIM/100MFCAM folder on the SD card.
PLOT CAM MODE
The camera takes photos at a specified interval during the day and combines
them together to create a Plot Video (*.MLT file) which can be viewed on the
supplied Moultrie Plot Stalker software. The camera takes a Plot Video twice
a day; once in the morning and once in the evening. The morning Plot Video
begins 15 min before sunrise. The evening Plot Video ends 15 min after
sunset. See chart below as a reference. The length of each Plot Video is
determined by the Plot Duration setting in the camera menu. The camera will
detect the correct sunrise and sunset times automatically and adjust itself
accordingly. The Plot Videos are stored in: DCIM/PLOT folder on the SD card.
IMPORTANT: It will take the camera 24hrs to properly adjust to the correct
sunrise and sunset times. As a default the camera will start the morning Plot
Video at 5:45am and end the evening video at 6:15pm. To reset the sunrise
and sunset times back to the default times, use the Default Settings option in
the menu.
The GameSpy offers four capture modes as described below.
The default capture mode is Trail Cam.
HYBRID CAM MODE
Camera operates in Plot Cam mode during the day and Trail Cam Mode during
the night. Thirty minutes after dusk the camera will enter the Trail Cam mode
and take night photos when the PIR sensor is triggered.
VIDEO MODE
Camera records a video when an animal is detected by the motion sensor.
During daylight hours the camera will record a video 5, 15 or 30 seconds in
length. During night the camera will record a video with a maximum length
of 10 seconds. The video length is configurable in SETTINGS.
4
CAPTURE MODES
NOTE: The camera can still be triggered to take a photo under certain settings
while in plot mode. Please see the "Plot Frequency" settings in the camera
setup section.
{
{
Morning Time Lapse Video
Evening Time Lapse Video
PlotStalker Software
M-880 GameSpy Digital Camera
Page 13
Page 4
PLOTSTALKER SOFTWARE INTRO
A
INTRODUCTION
In time-lapse photography a series
of still photos are taken at regular
time intervals. The PlotStalker
Software allows you to load the
time lapse file that was captured
from your Moultrie Game Camera
and scroll backward and forward
through your photos, single step,
search for activity in a designated
area, and save the files.
Computer: Intel® Pentium® 4 or AMD Athlon® 64 processor or above; 1GB
RAM minimum; 100 MB hard disk space minimum.
Operating System: Microsoft® Windows® 32 bit - XP with Service Pack 2 or
later; Windows Vista® Home Premium, Business, Ultimate, or Enterprise with
Service Pack 1; or Windows 7
Using standard Microsoft utilities (ex. File Explorer – My Computer),
copy the PlotFiles (extension is .MLT) from the PLOT directory on the
SD card to the hard disk drive in your computer. Note the location stored
on the hard disk drive.
Open the PlotStalker software application from the Windows Start Button
menu. Once in the PlotStalker software, click on the File Button
Browse to the location in which you have saved the Plot file(s)
(.MLT) in step 1 above, select the file of interest and click Open.
1
2
3
LOADING PLOT FILES
Insert the PlotStalker CD into your computer and follow on-screen instructions.
>
SYSTEM REQUIREMENTS
>
SOFTWARE INSTALLATION
BEGIN/END
Goes to the first or last photo in the Plot File.
FRAME BY FRAME SEARCH
Individually step forward or backward through each photo.
REWIND/PAUSE/PLAY
Play photos in sequence, pause, or play the photos in reverse order.
These functions simulate a video and are useful for manually searching
changes in the photos. When a sequence is being played, press
fast-forward or fast-rewind multiple times to increase speed. (1x-5x)
>
SYSTEM REQUIREMENTS
Computer:
Intel® Pentium® 4 or AMD Athlon® 64 processor or above; 1GB RAM minimum;
100 MB hard disk space minimum.
Operating System:
Microsoft® Windows® 32 bit - XP with Service Pack 2 or later; Windows Vista® Home
Premium, Business, Ultimate, or Enterprise with Service Pack 1; or Windows 7
TRAIL CAM MODE
Still photos are taken when an animal is detected. The number of photos taken
when an animal is detected is configurable in Settings. Photos are stored in
the in the DCIM/100MFCAM folder on the SD card.
PLOT CAM MODE
The camera takes photos at a specified interval during the day and combines
them together to create a Plot Video (*.MLT file) which can be viewed on the
supplied Moultrie Plot Stalker software. The camera takes a Plot Video twice
a day; once in the morning and once in the evening. The morning Plot Video
begins 15 min before sunrise. The evening Plot Video ends 15 min after
sunset. See chart below as a reference. The length of each Plot Video is
determined by the Plot Duration setting in the camera menu. The camera will
detect the correct sunrise and sunset times automatically and adjust itself
accordingly. The Plot Videos are stored in: DCIM/PLOT folder on the SD card.
IMPORTANT: It will take the camera 24hrs to properly adjust to the correct
sunrise and sunset times. As a default the camera will start the morning Plot
Video at 5:45am and end the evening video at 6:15pm. To reset the sunrise
and sunset times back to the default times, use the Default Settings option in
the menu.
The GameSpy offers four capture modes as described below.
The default capture mode is Trail Cam.
HYBRID CAM MODE
Camera operates in Plot Cam mode during the day and Trail Cam Mode during
the night. Thirty minutes after dusk the camera will enter the Trail Cam mode
and take night photos when the PIR sensor is triggered.
VIDEO MODE
Camera records a video when an animal is detected by the motion sensor.
During daylight hours the camera will record a video 5, 15 or 30 seconds in
length. During night the camera will record a video with a maximum length
of 10 seconds. The video length is configurable in SETTINGS.
4
CAPTURE MODES
NOTE: The camera can still be triggered to take a photo under certain settings
while in plot mode. Please see the "Plot Frequency" settings in the camera
setup section.
{
{
Morning Time Lapse Video
Evening Time Lapse Video
PlotStalker Software
M-880 GameSpy Digital Camera
Page 13
Page 4
PLOTSTALKER SOFTWARE INTRO
A
INTRODUCTION
In time-lapse photography a series
of still photos are taken at regular
time intervals. The PlotStalker
Software allows you to load the
time lapse file that was captured
from your Moultrie Game Camera
and scroll backward and forward
through your photos, single step,
search for activity in a designated
area, and save the files.
Computer: Intel® Pentium® 4 or AMD Athlon® 64 processor or above; 1GB
RAM minimum; 100 MB hard disk space minimum.
Operating System: Microsoft® Windows® 32 bit - XP with Service Pack 2 or
later; Windows Vista® Home Premium, Business, Ultimate, or Enterprise with
Service Pack 1; or Windows 7
Using standard Microsoft utilities (ex. File Explorer – My Computer),
copy the PlotFiles (extension is .MLT) from the PLOT directory on the
SD card to the hard disk drive in your computer. Note the location stored
on the hard disk drive.
Open the PlotStalker software application from the Windows Start Button
menu. Once in the PlotStalker software, click on the File Button
Browse to the location in which you have saved the Plot file(s)
(.MLT) in step 1 above, select the file of interest and click Open.
1
2
3
LOADING PLOT FILES
Insert the PlotStalker CD into your computer and follow on-screen instructions.
>
SYSTEM REQUIREMENTS
>
SOFTWARE INSTALLATION
BEGIN/END
Goes to the first or last photo in the Plot File.
FRAME BY FRAME SEARCH
Individually step forward or backward through each photo.
REWIND/PAUSE/PLAY
Play photos in sequence, pause, or play the photos in reverse order.
These functions simulate a video and are useful for manually searching
changes in the photos. When a sequence is being played, press
fast-forward or fast-rewind multiple times to increase speed. (1x-5x)
>
SOFTWARE INSTALLATION
Download your free Plot Stalker software at
www.moultriefeeders.com/plotsoftware
TRAIL CAM MODE
Still photos are taken when an animal is detected. The number of photos taken
when an animal is detected is configurable in Settings. Photos are stored in
the in the DCIM/100MFCAM folder on the SD card.
PLOT CAM MODE
The camera takes photos at a specified interval during the day and combines
them together to create a Plot Video (*.MLT file) which can be viewed on the
supplied Moultrie Plot Stalker software. The camera takes a Plot Video twice
a day; once in the morning and once in the evening. The morning Plot Video
begins 15 min before sunrise. The evening Plot Video ends 15 min after
sunset. See chart below as a reference. The length of each Plot Video is
determined by the Plot Duration setting in the camera menu. The camera will
detect the correct sunrise and sunset times automatically and adjust itself
accordingly. The Plot Videos are stored in: DCIM/PLOT folder on the SD card.
IMPORTANT: It will take the camera 24hrs to properly adjust to the correct
sunrise and sunset times. As a default the camera will start the morning Plot
Video at 5:45am and end the evening video at 6:15pm. To reset the sunrise
and sunset times back to the default times, use the Default Settings option in
the menu.
The GameSpy offers four capture modes as described below.
The default capture mode is Trail Cam.
HYBRID CAM MODE
Camera operates in Plot Cam mode during the day and Trail Cam Mode during
the night. Thirty minutes after dusk the camera will enter the Trail Cam mode
and take night photos when the PIR sensor is triggered.
VIDEO MODE
Camera records a video when an animal is detected by the motion sensor.
During daylight hours the camera will record a video 5, 15 or 30 seconds in
length. During night the camera will record a video with a maximum length
of 10 seconds. The video length is configurable in SETTINGS.
4
CAPTURE MODES
NOTE: The camera can still be triggered to take a photo under certain settings
while in plot mode. Please see the "Plot Frequency" settings in the camera
setup section.
{
{
Morning Time Lapse Video
Evening Time Lapse Video
PlotStalker Software
M-880 GameSpy Digital Camera
Page 13
Page 4
PLOTSTALKER SOFTWARE INTRO
A
INTRODUCTION
In time-lapse photography a series
of still photos are taken at regular
time intervals. The PlotStalker
Software allows you to load the
time lapse file that was captured
from your Moultrie Game Camera
and scroll backward and forward
through your photos, single step,
search for activity in a designated
area, and save the files.
Computer: Intel® Pentium® 4 or AMD Athlon® 64 processor or above; 1GB
RAM minimum; 100 MB hard disk space minimum.
Operating System: Microsoft® Windows® 32 bit - XP with Service Pack 2 or
later; Windows Vista® Home Premium, Business, Ultimate, or Enterprise with
Service Pack 1; or Windows 7
Using standard Microsoft utilities (ex. File Explorer – My Computer),
copy the PlotFiles (extension is .MLT) from the PLOT directory on the
SD card to the hard disk drive in your computer. Note the location stored
on the hard disk drive.
Open the PlotStalker software application from the Windows Start Button
menu. Once in the PlotStalker software, click on the File Button
Browse to the location in which you have saved the Plot file(s)
(.MLT) in step 1 above, select the file of interest and click Open.
1
2
3
LOADING PLOT FILES
Insert the PlotStalker CD into your computer and follow on-screen instructions.
>
SYSTEM REQUIREMENTS
>
SOFTWARE INSTALLATION
BEGIN/END
Goes to the first or last photo in the Plot File.
FRAME BY FRAME SEARCH
Individually step forward or backward through each photo.
REWIND/PAUSE/PLAY
Play photos in sequence, pause, or play the photos in reverse order.
These functions simulate a video and are useful for manually searching
changes in the photos. When a sequence is being played, press
fast-forward or fast-rewind multiple times to increase speed. (1x-5x)
>
