Moulinex Kaseo MO6011T1, Руководство пользователя

Страница: 12 / 57

11
F
GB
I
E
P
SA
FA
TR
2. C
LEANING THE
HEPA
FILTER (REF. RS-RT 9813)
• The light on the filtering system (10) is red,
clean the HEPA filter (16) and the foam filter.
• Press the locking button of the dust collector (8)
of your vacuum cleaner and lift it to remove it
from its compartment (13)
– fig. 8.
• Remove the HEPA filter (16) from its
compartment
– fig. 15.
• Wash the foam filter under running water fig. 17
and leave it to dry around 24 hours
- fig. 18
.
• Clean the HEPA filter (16): tap it over a waste bin
– fig. 16.
• If after tapping your HEPA filter the indicator light
remains red, you need to change your HEPA filter
(ref. RS-RT 9813)
• If the HEPA filter (16) is damaged, change it.
Throw the HEPA filter (16) into a waste bin
– fig.
16
and change it with a new HEPA filter (ref. RS-
RT 9813).
• Replace the HEPA filter in its casing
- fig. 19
,
along with the foam filter.
• Put the dust collector (5) back into its
compartment (13) until it engages with a click
–
fig. 14.
3. C
HANGE THE AIR OUTLET FILTER
•Lift the fold-down handle
- fig. 20
and remove
the air outlet grid (9) by lifting the unlocking button
- fig. 20
.
Replace the air outlet filter (15) (ref. RS-RT 9549).
• You can also change the air outlet filter (15) (ref.
RS-RT 9549).
• Fit the air outlet grill (9) until it engages with a
click
- fig. 23.
5. C
LEAN THE VACUUM CLEANER
• Clean the housing of the vacuum cleaner with
a soft and humid rag and let dry with a dry rag
-
fig. 24
.
• Wash the dust collector (5) in clean water and
then dry it. Check that the dust collector is
completely dry before putting it back in place.
Caution: Make sure that the dust collector is
completely dry before putting it pack in place.
• Do not use abrasive or aggressive products.
TROUBLESHOOTING
1. I
F YOUR VACUUM CLEANER DOES NOT START
• The appliance is not plugged-in, check that
the appliance is correctly plugged in.
2. I
F THERE IS NO SUCTION
• An accessory or the tube is clogged. Unclog
the accessory tube or flexible hose.
• If the dust collector is not correctly locked,
check how it was put back in place.
• The HEPA filter is saturated, the indicator light of
the filtration system is red: tap the HEPA filter. If
the problem persists, change the HEPA filter
(ref. RS-RT 9813)
3. I
F THE SUCTION OF YOUR VACUUM CLEANER
HAS DROPPED
,
IT MAKES A NOISE AND WHISTLES
• An accessory or the flexible hose is partially
clogged. Unclog the accessory tube or
flexible hose.
• If the dust collector is full, empty it and wash it.
• The filter system is saturated, the light on the
filter system is red: wash the foam, leave it to
dry around 24 hours and replace it. If the light
stays red, clean the HEPA filter. If the problem
continues, change the HEPA filter (ref. RS-RT
9813).
• If the dust collector is not fully engaged in its
housing, push it in fully until it engages with a
click.
• If the mechanical power control of the power
nozzle is open, close it.
4. I
F THE FLOOR HEAD IS HARD TO MOVE AROUND
• Open the mechanical power control of the
power nozzle.
5. I
F THE POWER CABLE DOES NOT REWIND
COMPLETELY
• The power cable is slow in re-entering its
housing. Pull the cable back out and press on
the automatic cable rewind pedal.
If you have any product problems or queries,
please contact our customer Relations Team
first for expert help and advice (see the
contact details on the last page).
1
2
NoticeKASEO MO 901248C.qxd:901248C 12/01/09 16:28 Page 11