MOULDPRO TCU-90, Руководство пользователя

Страница: 35 / 43

[35]
User Guidelines
– TCU-90
12-06-2019 Vers. 003
The following maintenance intervals may be required subject to use and environment:
Water filter clean / replace every month
Pump motor blow out the fan every 6 months
Hoses and pipes check tightness every 6 months
Pump check tightness every 6 months
Bolts and seals check tightness every 12 months
Heat transfer oil (only valid for oil units) change every
4‘000 working hours
For extreme service, the intervals must be shortened accordingly. For temperature control units running with
oil, the oil should be changed yearly, depending on the temperature. Comply with the directives and
recommendations of the oil manufacturer!
13.1 Inspection
Before starting the unit has to be checked the general condition of the temperature control unit, the electrical
connection and the tightness of the connections and hoses (including the consumer).
13.2 Cleaning
The temperature control unit has to be checked and cleaned periodically. Before maintenance the unit has to
be disconnected from the power supply.
13.3 Repair
Established defects must be repaired. To guarantee safety the unit must be repaired with original
MOULDPRO spare parts only.