MOULDPRO TCU-150, Руководство пользователя

Страница: 6 / 43

[6]
User Guidelines
– TCU-150
12-06-2019 Vers. 003
Any use beyond this shall be deemed to constitute improper use. The manufacturer is not responsible for
damage resulting from improper use; the user is solely responsible for such risks. The temperature control
unit may not be used under other operating conditions and/or with other media, in deviation from our
specifications, without the prior consent of MOULDPRO.
Use as intended also entails compliance with the operating, servicing and maintenance conditions stipulated
by the manufacturer. The temperature control unit may only be operated, serviced and maintained by
personnel who are familiar with these tasks and have been instructed as to the risks.
2.4 Safety Information
2.4.1 General Information
The MOULDPRO temperature control unit is safe to operate, but this device can pose danger to life and limb
if it is used incorrectly or for a purpose other than that intended. It should be noted that this poses risks to the
life and limb of the user or third parties, adverse effects on the equipment and other material assets
belonging to the user, and risks to the efficient operation of the equipment.
Start-up (i.e., commencement of intended use) is prohibited until it has been determined that the temperature
control unit has been set up and wired in accordance with the Machinery Directive (2006/42/EC). EN 60204-1
(Safety of Machinery) must also be observed.
These operating instructions must be read carefully before turning on and operating the temperature control
unit. The information regarding the intended use and foreseeable misuse must be observed. Local safety
regulations must also be obeyed.
If the temperature control unit is used in combination with products by other manufacturers, their notices and
safety regulations must also be obeyed.
2.4.2 Process Monitoring
In plants in which a temperature control system malfunction leads to endangerment of the operating
personnel or destruction of the plant, an independent process monitor that shuts down the plant reliably must
be used.
2.4.3 Information for Operators and Personnel
The operator and all persons who are tasked with working on the temperature control unit must obey the
fundamental regulations regarding work safety and accident prevention. The operator must ensure that only
persons who have read and understood these operating instructions, particularly the chapter on safety, work
on the temperature control unit.
WARNING
People with pacemaker should not be allowed to demount or maintain the
magnetically coupled pump!
Any working methods that have a negative effect on the technical safety of the temperature control unit must
not be used. The operator must ensure that the temperature control unit is operated only in flawless condition.