EN-6
STOPWATCH
press ModE button and enter stopwatch mode (chrono).
- press start/stop button to start the stopwatch.
upper line indicates lap timing and lower line shows total
elapsed time.
- press lap/rEsEt button to mark lap time.
upper line flashes showing lap number and lower line the
related timing for some seconds.
- the display goes back to lap time and total elapsed time
view.
- when the fastest lap is detected the display shows
flashing “FastEst” text and the device beeps.
- press start/stop to pause the stopwatch.
press lap/rEsEt to restart it.
stop and Data storage
Each timing session has to be saved in order to be recalled
from “chrono data” mode and to start a new session.
- press start/stop button twice (pause > End) to stop the
stopwatch.
- upper line shows “ENd” text and lower line shows total
elapsed time.
- hold start/stop for a few seconds.
- the display shows “storE data” text and chronograph
data are stored.
- after storing timing data, the stopwatch is ready for a new
session.
Note: stopwatch precision is 1/100 of a second for the first
60 minutes and “h:mm:ss” for the following timing.
