Motus Pro 8.5, Оригинальное руководство пользователя

Страница: 13 / 20

13
a. Power button
Press and hold the power switch for more than 3 seconds to turn on the LED
screen. The device will turn off automatically if it is not moved within 90 se -
conds.
b. Acceleration and speed
After turning on the device, press the power button. L1 will appear on the
screen, indicating gear 1 (up to 15 km / h ). Press the power button again and
the screen will show L2 indicating gear 2 (15 - 25 km / h). Press the power but -
ton again and the screen will display L3 indicating gear 3 (25-40 km / h). Hold
down the power button for 2-3 seconds and the front light will turn on.
d. Battery charge level.
The number of bars indicates the battery charge status.
Note: Charge the battery when only one bar appears on the display, as over
discharging may damage the battery.
e. Display
After turning on the power, the display shows the total distance traveled by
the device (ODO). Press the power button to display the distance traveled
since power-on (TRIP); press the power button again, the battery voltage will
be displayed. When TRIP is displayed, holding the MODE key for three se -
conds will reset the TRIP data.
Speed
Battery indicator
(POWER) switch
MODE button
Throttle
Thanks to the shifter, the user can
control the speed depending on
the current situation.
Handle - grab the handles to steer the device. Do not take your hands off the
steering wheel while driving.
4.2 Battery properties and charging
Charging
1. Connect the charger to an AC mains.
2. Connect the Electric Scooter to the charger.
3. Full charging takes approximately 8 - 10 hours
4. The ideal charging temperature is 5-40 ° C. If the cells’ temperature is out
of range, the battery management system will stop the charging process.
Battery properties
1. Balanced charging protection: The construction of the battery is designed
to automatically balance the voltage of the internal cells and thus protect the
battery.
2. Overcharge Protection: Overcharging can seriously damage the battery.
After the battery is fully charged, the charging process will be automatically
interrupted by the control board.
3. Charging temperature: The battery may be damaged or malfunctioning if
it is charged in an ambient temperature below 5 degrees Celsius or above 40
degrees Celsius.
4. The ideal charging temperature is 5-40 ° C. If the cells’ temperature is out
of range, the battery management system will stop the charging process.
Battery properties
1. Balanced charging protection: The construction of the battery is designed
to automatically balance the voltage of the internal cells and thus protect the
battery.
2. Overcharge Protection: Overcharging can seriously damage the battery.
After the battery is fully charged, the charging process will be automatically