3
2. ASSEMBLY AND ELECTRICAL CONNECTION
Make a 50 x 38 mm opening in the door panel as shown in the figure.
1. ESCUTCHEON
I N S T A L L E R
GREEN / RED LED
(FUNCTIONS SIGNAL)
BLUE LED
(POWER STATUS)
BRUSHED STEEL ESCUTCHEON
SWIPE-TYPE FINGERPRINT
SCANNER WITH SENSOR
SELF-CLEANING DEVICE
Connect the scanner to the door opener logic unit.
RESET KEY:
press for 5 sec. to return the
scanner to factory settings.
AUTHENTICATION KEY:
required only if the ope-
ner logic unit is replaced.
ESCUTCHEON
OPENER LOGIC UNIT
AUTHENTICATION KEY
RESET KEY
THE OPENER LOGIC UNIT must be placed inside the door at a point that is INACCES-
SIBLE from the outside (BURGLAR-RESISTANT).
Содержание X Mode 99.690
Страница 8: ...99299GB 07 14 a_013434 www mottura it...