Dx350_06d_oi_e.docx / Jul-20
page 34 / 67
Mode Velocity
In this menu the operation as a runtime measurement for speed is defined.
Input A is the start input and Input B is the stop input. This menu is only displayed when the appropriate
OPERATIONAL MODE in GENERAL MENU is selected.
START / STOP
Setting the start and stop condition.
RISE TO RISE
Start = rising edge at input A
Stop = rising edge at input B
FALL TO FALL
Start = falling edge at Input A
Stop = falling edge at Input B
RISE TO FALL
Start = rising edge at input A
Stop = falling edge at Input B
FALL TO RISE
Start = falling edge at Input A
Stop = rising edge at input B
DISPLAY VALUE
Desired value, which should be displayed at the setting of BASE TIME (S).
1
Smallest value
1000
Default value
999999
Highest value
BASE TIME (S)
Reference time for the desired DISPLAY VALUE.
0.001
Smallest value
1
Default value
999.999
Highest value
DECIMAL POINT
This value defines the position of the decimal point.
0 NO
No decimal point
1 0000000.0
Decimal point at the specified position
2 000000.00
Decimal point at the specified position
3 00000.000
Decimal point at the specified position
4 0000.0000
Decimal point at the specified position
5 000.00000
Decimal point at the specified position
6 00.000000
Decimal point at the specified position
7 0.0000000
Decimal point at the specified position
