5
SPEED
NEVER RIDE DOWN HILLS THAT ARE TOO STEEP.TO MAINTAIN SAFE CONTROL
OF YOUR ELECTRIC SKATEBOARD NEVER RIDE DOWN HILLS THAT REQUIRE
CONSTANT BRAKING,AS IT CAN DAMAGE THE BOARD’S ELECTRONICS.
Turning your Electric Skateboard
The Electric Skateboard turns like any other skateboard.Apply pressure to the deck with your
heels or toes and the board will turn in that direction.More pressure will result in tighter
turns.In the hands of experienced rider,the Electric Skateboard is capable of making 10”
radius 180º turns.
Do not try to make turns at full speed.
SLOW DOWN!
MAINTAINING YOUR ELECTRIC SKATEBOARD
MAINTENANCE WARNING
FAILURE TO FOLLOW MAINTENANCE INSTRUCTIONS AND GUIDELINES WILL VOID
YOUR WARRANTY.DO NOT OPEN BATTERY BOX!DOING SO WILL VOID YOUR
WARRANTY.
Routine Maintenance
Under normal use,your Electric Skateboard will require very little routine maintenance.Check
all fasteners for tightness before every use,especially if used on irregular surfaces.This will
require an allen wrench and a few different sized sockets or open-ended wrenhes.Your
Electric Skateboard is not waterproof and must not be ridden in the rain,mud,or other wet
areas to prevent electrical damage.Always keep your board clean and free of moisture.
Drive Wheel Replacement
It is normal for the drive wheel to wear faster than the other wheels.DRIVE WHEEL
REPLACEMENTS are available from Manufacturer or Dealer.
Drive Belt Replacement
Due to the superior design of the Electric Skateboard the drive belt will last a long time,but
eventually will wear out.Replacements can be ordered from Manufacturer or Dealer.
Wheel Replacement
As with any skateboard,the wheels of the Electric Skateboard will wear out with
use.Replacement wheels,bearings and spacers are available from Manufacturer or Dealer.
Rubber Bushing Replacement
Although specially formulated for extremely long life,the rubber bushings located in the
trucks of your Electric Skateboard will wear over time.It is recommended that they be
replaced with the same special bushings that are standard equipment on the board.They are
available through Manufacturer or Dealer.
