MotoSAT Nomad SD2, Руководство пользователя

Страница: 10 / 23

10
ERROR CODES
Error Error Critical
Code Description Error = ! (Factory action required)
0
NO ERROR
1 MOTOR, MOVING Normal Operation
2 INVALID MODE 1 Check Configuration
3 INVALID MODE 2 Check Configuration
4 MOTOR, TIMEOUT EL
5 MOTOR, TIMEOUT AZ Check sensors
6 MOTOR, TIMEOUT SK
7 LIMIT ERROR, EL
8 LIMIT ERROR, AZ Check for obstructions
9 LIMIT ERROR SK
10 TUNER FAILURE !
11 AGC, NO LOCK !
12 MAIN SAT ONLY FOUND
Check for obstructions
13 MAIN SAT NOT FOUND
14 UNUSED
15 UNUSED
16 NO SATELLITES FOUND Check for obstructions
17 OVER TEMP (This code does not necessarily mean that the Nomad
controller has a problem. It indicates that the temperature within the working
environment has exceeded a normal operational level and could damage or affect
normal operation of your electronic equipment. Correct the over temperature
problem and if problem continues replace the Nomad controller. You have been
warned concerning damage to your other electronics in the cabinet.
18 DISH HEIGHT ERROR - Possible Elevation sensor failure
19 COAX ERROR – Reverse Coax cables on back on controller
20 UNUSED
21 UNUSED
22 GPS FAILURE –
Press the FIND button once and then press it again and hold it for 3
seconds. This will bypass Return to Last Known Satellite location. If the GPS has failed to read
it will also bypass the GPS and do a regular search routine.
23 NO MAIN AFTER SKEW
24 CRITICAL INTERNAL FAILURE !
25 LNB POWER FAILURE
!
26 TUNER AMP ON, FAILURE
!
27 TUNER ID, FAILURE !
28 MOTOR, FAILURE - Check sensors
29 COUNTER, FAILURE - Check sensors
30 MOUNT MISS-MATCH – Check Programming configuration