Figure 2: CPS Cable
Figure 3: Cloning Cable
Figure 4: USB Converter
5.4
Operating Instructions
The following steps explain the operating instructions of
cloning radio using R2R:
1
Turn the radios off and prepare the following
equipment:
• A fully charged battery on each of the radios.
• Two SUC for cloning XT600d Series radios.
2
Unplug all cables (power supply or USB cables) from
the SUCs.
3
Connect the cloning cable with USB Converter, plug
one side of the cloning cable's mini USB connector
to the first SUC and the other side to the second
SUC.
NOTICE:
During the cloning process, no power is being
applied to the SUC. The batteries will not be
charged. Only data communication is being
established between the two radios.
4
Turn the Target radio on and place it into one of the
SUCs.
5
For the Source radio, turn the radio on with the
following sequence:
a
Long press the
PTT
button and the
SB2
button
simultaneously while turning the radio on.
b
Wait for 3 seconds before releasing the buttons
and you hear a distinctive audible tone saying the
word “Cloning”.
English
61
Содержание XT660d
