Motorola WT4090, Руководство интегратора

Страница: 25 / 206

Getting Started 1 - 5
Charging the Battery
Charging the Main Battery and Memory Backup Battery
Before using the wearable terminal for the first time, charge the main battery until the amber Charge Status LED
remains lit (see
Table 1-2 on page 1-5 for charge status indications).
The wearable terminal is equipped with a memory backup battery which automatically charges from the main
battery whether or not the wearable terminal is operating or is in suspend mode. The memory backup battery
retains data in memory for at least 30 minutes when the wearable terminal's main battery is removed or fully
discharged. When the wearable terminal is used for the first time or after the memory backup battery has fully
discharged, the memory backup battery requires approximately 15 hours to fully charge. Do not remove the main
battery from the wearable terminal for 15 hours to ensure that the memory backup battery fully charges. If the main
battery is removed from the wearable terminal or the main battery is fully discharged, the memory backup battery
completely discharges in several hours.
When the wearable terminal reaches a very low battery state, the combination of main battery and backup battery
retains data in memory for at least 24 hours.
Charge the wearable terminal with an installed main battery using either the Single Slot USB cradle or the Four Slot
Ethernet cradle.
To charge the main battery:
1.
Ensure the cradle used to charge the main battery is connected to the appropriate power source.
2.
Insert the wearable terminal into a cradle.
3.
The wearable terminal starts to charge automatically. The amber Charge Status LED lights to indicate the
charge status. See
Table 1-2 for charging indications.
CAUTION
Ensure that you follow the guidelines for battery safety described in Battery Safety Guidelines on page
10-3 .
NOTE
Do not remove the main battery within the first 15 hours of use. If the main battery is removed before the
backup battery is fully charged, data may be lost.
Table 1-2
Wearable Terminal LED Charge Indicators
LED Indication
Off Wearable terminal is not in cradle. Wearable terminal not placed correctly. Charger is not
powered.
Fast Blinking Amber Charging error:
•
Temperature is too low or too high.
•
Charging has gone on too long without completing (typically eight hours).
Slow Blinking Amber Wearable terminal is charging.
Solid Amber Charging complete.
Note: When the battery is initially inserted in the wearable terminal, the amber LED flashes
once if the battery power is low or the battery is not fully inserted.