Motorola WMC6300, Руководство пользователя

Страница: 48 / 74

Chapter 4: MeshTray
6881011Y52-O August 2005
4-4
Control Channel Configuration
There are four channels available for 2.4 GHz network communications. The Network Administrator
can map the four available Physical channels to three Data channels and one Control channel. The
Data channels will be used for data transmission between subscriber devices, infrastructure devices,
and the network. When the using the 2.4 GHz Wireless Modem Card (WMC), the Control channel is
designated for internal MEA communication. By default, it is set to the physical channel 3 (2.47 GHz).
When working with the 4.9 GHz WMC the available channels are 4.950, 4.955, 4.960, and 4.965.
Changing the Control Channel
A user should never change the channel mappings unless specifically instructed to do so by the
Network Administrator.
Do not enter decimal point values as
they will be dropped after, the “Apply”
button is selected.
Reporting Interval in seconds
The reporting interval must be entered in seconds (up to a
maximum of 180 seconds) and is used for updating the
Geo
Position tab data contents for longitude and latitude or X, Y, Z
positions for the Spherical Coordinate Use the Up arrow to set the
number of seconds.
IP Address of server to report
position to
This is the IP Address where the geo position is forwarded or
reported to. Typically, this is a centralized server that displays the
position of all devices on the network.