manualshive.com logo in svg

Motorola WiNG 5, Справочное руководство системы

Motorola WiNG 5 - это инновационное решение для беспроводных сетей. Устройство предоставляет доступ к System Reference Manual для детального понимания работы продукта. Пользователи могут скачать этот руководство бесплатно на manualshive.com. Узнайте больше о возможностях WiNG 5 и оптимизируйте свою беспроводную сеть.

Поделиться
Скачать
background image

9 - 16 WiNG 5 Access Point System Reference Guide

9.3 Setting the DHCP Server Configuration

Dynamic Host Configuration Protocol 

(DHCP) allows hosts on an IP network to request and be assigned IP addresses 

as well as discover information about the network where they reside. Each subnet can be configured with its own 
address pool. Whenever a DHCP client requests an IP address, the DHCP server assigns an IP address from that 
subnet’s address pool. When the DHCP server allocates an address for a DHCP client, the client is assigned a lease, 
which expires after an pre-determined interval. Before a lease expires, wireless clients (to which leases are assigned) 
are expected to renew them to continue to use the addresses. Once the lease expires, the client is no longer permitted 
to use the leased IP address. The DHCP server ensures all IP addresses are unique, and no IP address is assigned to 
a second client while the first client's assignment is valid (its lease has not expired). Therefore, IP address 
management is conducted by the DHCP server, not an administrator.

AP-7131, AP-6532 and AP-7161 model access points have an internal DHCP server resource. However, 
AP-6511 and AP-6521 models do not have an onboard DHCP server resource and an external resource must be used.

The DHCP server groups wireless clients based on defined user-class option values. Clients with a defined set of user 
class values are segregated by class. A DHCP server can associate multiple classes to each pool. Each class in a pool 
is assigned an exclusive range of IP addresses. DHCP clients are compared against classes. If the client matches one 
of the classes assigned to the pool, it receives an IP address from the range assigned to the class. If the client doesn't 
match any of the classes in the pool, it receives an IP address from a default pool range (if defined). Multiple IP 
addresses for a single VLAN allow the configuration of multiple IP addresses, each belonging to different subnet. 
Class configuration allows a DHCP client to obtain an address from the first pool to which the class is assigned.

A single DHCP server configuration is supported by the access point, no separate DHCP policies can be defined and 
maintained. For more information, refer to the following:

•

Defining DHCP Pools

•

Defining DHCP Server Global Settings

•

DHCP Class Policy Configuration

9.3.1 Defining DHCP Pools

A pool (or range) of IP network addresses and DHCP options can be created for each IP interface configured. This 
range of addresses can be made available to DHCP enabled wireless devices within the network on either a 
permanent or leased basis. DHCP options are provided to each DHCP client with a DHCP response and provide DHCP 
clients information required to access network resources such as a default gateway, domain name, DNS server and 
WINS server configuration. An option exists to identify the vendor and functionality of a DHCP client. The information 
is a variable-length string of characters (or octets) that has a meaning specified by the vendor of the DHCP client.

To define the parameters of a DHCP pool:

1. Select 

Configuration

 > 

Services

 > 

DHCP Server

. The DHCP Pool tab displays by default.

Содержание WiNG 5



































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для WiNG 5

Kasda KA300 User Manual preview
KA300
Бренд: Kasda Страницы: 42
Raymarine Base Station Installation And Commissioning Manual preview
Base Station
Бренд: Raymarine Страницы: 20
NetComm NF12 Configuration Manual preview
NF12
Бренд: NetComm Страницы: 3
SIYI MK15E User Manual preview
MK15E
Бренд: SIYI Страницы: 95
Telrad CPE7000 Indoor Quick Installation Manual preview
CPE7000 Indoor
Бренд: Telrad Страницы: 10
Lancom OAC-54-1 Manual preview
OAC-54-1
Бренд: Lancom Страницы: 79
NETGEAR RangeMax NEXT WNR834A Reference Manual preview
RangeMax NEXT WNR834A
Бренд: NETGEAR Страницы: 106
Kasda KF162 User Manual preview
KF162
Бренд: Kasda Страницы: 32
Alfa Network AIP-W502 User Manual preview
AIP-W502
Бренд: Alfa Network Страницы: 115
Yunlink HWAP80-P48 User Manual preview
HWAP80-P48
Бренд: Yunlink Страницы: 27
AirLive AAP-24005g User Manual preview
AAP-24005g
Бренд: AirLive Страницы: 50
Enfora Portfolio GSM0400 Series User Manual preview
Portfolio GSM0400 Series
Бренд: Enfora Страницы: 23
UAT WL-3111 User Manual preview
WL-3111
Бренд: UAT Страницы: 24
Ebyte E18-TBH-27 User Manual preview
E18-TBH-27
Бренд: Ebyte Страницы: 5
Ebyte E103-W06-TB User Manual preview
E103-W06-TB
Бренд: Ebyte Страницы: 5
Ebyte E01-2G4M27SX User Manual preview
E01-2G4M27SX
Бренд: Ebyte Страницы: 12
Ebyte E10 Series User Manual preview
E10 Series
Бренд: Ebyte Страницы: 14
TECOM BT3021 User Manual preview
BT3021
Бренд: TECOM Страницы: 17

Бренды по названию

Популярные бренды

Загрузить еще бренды