Motorola VML750, Руководство по установке

Страница: 36 / 65

Modem Installation Process Chapter 2: VML750 Installation
Modem Installation Process
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
■
■
Process 2-1 describes the steps for the modem installation.
Process 2-1 How to Install the VML750 Modem
1 Ensure adequate space for the installation. (See "Planning the Installation" on
page 2-3 )
2 Install the antennas. (See "Antenna Mounting" on page 2-12 ). Refer to the
Installation Guide supplied with each antenna.
3 Route the cables. (See "Planning the Installation" on page 2-3 and "Cables
Routing and Connection Procedure" on page 2-15 ).
4 Install the brackets and the unit. (See "Modem Installation Procedure" on page
2-14 ).
5 Connect the DC Power and Ignition cable. (See "DC Power and Ignition Cable
Installation" on page 2-15 ).
6 Connect the main antenna cables. (See "Antenna Cables Installation (Main and
Diversity) for LTE Private Network Configuration" on page 2-16 or "Antenna
Cables Installation (Main and Diversity) for B20 LTE only Configuration" on
page 2-17
).
7 Connect the LAN/Ethernet cable (see "LAN/Ethernet Cable Installation" on page
2-18 ) or the Micro USB cable (see Procedure 2-7, "How to Install the Micro
USB Cable," on page 2-18 ).
8 Place caps on unused connector(s). (See "Cap Installation" on page 2-23 ).
9 Perform VML750 Power-on process. (See "Powering the Modem Up" on page
2-23 ).
Antenna Mounting
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
■
■
Procedure 2-1 gives general instructions for mounting the antennas.
2-12
6802988C54-B July 2014