Motorola TLKR T92 H2O, Руководство пользователя, Страница: 11 / 178

9
En
gl
is
h
Scanning
Use the scan function to do the following:
• Search the 8 channels for transmissions from unknown
parties.
• Find someone in your group who has accidentally changed
channels or
• To quickly find unused channels for your own use.
There is a priority feature and 2 modes of scanning (basic and
advanced) to make your search more effective.
• The “Basic Scan” mode uses the channel and code
combinations for each of the 8 channels as you have set
them (or with the default code value of 1).
• The “Advance Scan” mode will scan all channels for any and
all codes; detect any code in use and use that code value
temporary for that channel.
• Priority is given to the “Home Channel” (i.e. the channel and
Interference Eliminator Code your radio is set to when you
start the scan). This means the initial channel (and code
settings) is scanned more often than the other 7 channels
and your radio will respond quickly to any activity occurring
on the home channel as a priority.
To start Basic Scanning:
1. Press the key briefly. The Scan icon will appear in
the display and the radio will begin to scroll through the
channel and code combinations.
2. When the radio detects channel activities matching the
channel and code combination, the radio will stop scrolling
and you can hear the transmission.
3. Press the PTT button within five minutes after the end of the
transmission to respond and talk to the person transmitting.
4. The radio will resume scrolling through the channels five
seconds after the end of any received activity.
5. Press the Scan/Monitor button briefly to stop scanning.
To start Advanced Scanning:
To set another channel and start Dual Channel Monitor:
1. Press the Scan/Monitor button briefly. The Scan
icon will appear in the display and the radio will begin to
scroll through the channels. No Interference Eliminator
Codes will filter what is heard.
2. When the radio detects channel activities with ANY code (or
NO code), it stops scrolling and you can hear the
transmission. Any Interference Eliminator Code that may be
use by other party will be detected and displayed.
3. When you respond and talk to the person transmitting, press
the PTT button within five seconds after the end of the
transmission.
4. The radio will resume scrolling through the channels five
seconds after the end of any received activity.
5. Press the Scan/Monitor button briefly to stop scanning.
Scanning Notes:
1. The transmission will be on the “Home Channel” if you press
the PTT button while the radio is scrolling through inactive
channels. You may press the
Scan/Monitor button to
stop scanning at any time.
2. You may immediately resume the scan by briefly pressing
the or if the radio stops on an undesired
transmission.
3. You may temporarily remove that channel from the scan list
by pressing and holding or for three seconds if the
radio stops repeatedly on an undesired transmission. You
may remove more than one channel this way.
4. Turn the radio OFF and then turn back ON, or EXIT and re-
enter the scanning mode by pressing Scan/Monitor
button to restore and remove channel(s) to the scan list.