To Communicate
Read this manual carefully and make sure you know how to properly operate radio before use.
Motorola Talkabout two-way radios have 14 channels. To communicate with others, all radios in your group must
be set to the same channel and Interference Eliminator Code.
Turn The Radio On:
1. Rotate
Power/Volume
knob clockwise until you hear a click. Radio will beep and LED Indicator Light will flash
to confirm.The display will show current channel and code. LED will flash every three seconds.
2. To turn radio off, rotate
Power/Volume
knob counter clockwise until you hear a click and display disappears.
Note:
All icons on the display will light up briefly, some of which may not be supported by your radio.
Monitor Button:
The
Monitor/Scan
button lets you hear the radio’s volume level when you are not receiving so you can
adjust the volume. It is also used to check activity on current channel before transmitting.
Channel Busy Indicator:
The radio also has a Channel Busy Indicator where the LED will also flash twice per second to indicate the
channel frequency is in use.
Adjust The Volume:
Rotate
Power/Volume
knob while holding down the
Monitor/Scan
button until you reach a comfortable
listening level. Rotate knob clockwise to increase and counter clockwise to decrease volume.
5
