5
English
Talking and Listening
All radios in your group must be set to the same channel and
Interference Eliminator Code in order to communicate.
1. Hold your radio 5–8 cm from your mouth.
2. Press and hold the
PTT
button while speaking. The Transmit
icon appears on the display.
3. Release the
PTT
button. You can now receive incoming
calls. When you do, the Receive
icon appears on the
display.
For maximum clarity, hold the radio 2 to 3 inches away and
avoid covering the microphone while talking.
Talk Range
Your radio is designed to maximize performance and improve
transmission range. Do not use the radios closer than 5 feet
apart.
Monitor Button
Pressing and holding
Scan/Monitor button 3 seconds
allows you to listen to the volume level of the radio when you
are not receiving. This allows you to adjust the volume, if
necessary. You can also press
Scan/Monitor button to
check the activity on your current channel before you talk.
Push-to-Talk Time-out Timer
To prevent accidental transmissions and save battery life, the
radio emits a continuous warning tone and stops transmitting if
you press the
PTT
button for 60 seconds continuously.
Menu options
Note: *Only Channels one to eight are available by default.
Channels 9 to 16 need to be activated by user before
they can be selected. Channels 9 to 16 should be
used in countries where these frequencies are
allowed by government authorities. Channels 9 to 16
are not allowed in Russia.
Menu Key
Menu Key
Menu Key
Menu Key
Menu Key
Menu Key
Menu Key
Menu Key
Menu Key
Menu Key
Two Way Mode
Channel (1-8
)
Sub Code (0-121)
Call Tone (1-20)
Vibrate Alert (On/Off)
Keypad Tones (On/Off)
Talk Confirmation Tones (On/Off)
Dual Watch Channel (1-22)
Dual Watch Interference Eliminator Code
Voice Operated Transmission
(VOX) (Off, L1,L2,L3)
MN002243A01_.book Page 5 Tuesday, March 20, 2018 5:27 PM
