Motorola Talkabout T82C, Руководство пользователя

Страница: 8 / 24

6
English
• On the Leader’s radio, user must remember not to release the
button on the first (single) beep, otherwise this radio will become
another Member’s radio. If that happens, you can press PTT to
escape, and retry the steps described in #3 again.
Internal Voice Operated Transmission/
Voice Operated Transmission ( / )
Transmission is initiated by speaking into the microphone of
the radio/audio accessory instead of pushing the PTT
button.
1. Press Menu until the icon appears on the
display. When audio accessory is connected, the
icon will be shown. The current setting (Off, L1–L3)
flashes.
2. Press or to select the sensitivity level.
3. Press the
PTT button to exit menu or Menu to continue
set up.
Note: When using iVOX/VOX, there will be a short delay.
Dual Channel Monitor
Enables you to scan the current channel and another
channel alternately.
To set another channel and start Dual Channel Monitor:
1. Press Menu until the Dual Channel Monitor icon
appears. The Dual Channel Monitor icon flashes.
2. Press or to select the channel then press Menu.
3. Press or to select the Sub-Code.
4. Press the
PTT button or wait until time out to activate
Dual Channel Monitor. The screen will alternate between
home channel and Dual Channel Monitor channel.
5. To end Dual Channel Monitor, press Menu.
Note: If you set the same channel and Sub-Code as the current channel,
Dual Channel Monitor does not work.
Silent Mode
Silent Mode (Vibrate Alert) notifies you that your radio is
receiving a message. This is useful in noisy environments.
The Vibrate Alert is triggered when you received a call. The
Vibrate Alert is triggered again if there is no activity within 30
seconds after the previous call.
1. Press Menu until the Vibrate Alert icon is displayed.
The current setting will flash.
2. Press or to change the setting to On/Off.
3. Press the
PTT button to exit menu or Menu to continue
set up.
Keypad Tones
You may enable or disable the keypad tones. You will hear
the key tone each time a button is pushed.
1. Press Menu until the Keypad Tone
icon appears.
The current setting On/Off will flash.
2. Press either or to turn On/Off.
3. Press the
PTT button to confirm or Menu to continue
set up.
Roger Tone
You can set your radio to transmit a unique tone when you
finish transmitting. It is like saying “Roger” or “Over” to let
others know you have finished talking.
1. Press Menu until the Roger Tone icon appears. The
current setting On/Off flashes.
2. Press or to turn On or Off.
L3 = High Sensitivity for quiet environments
L2 = Medium Sensitivity for most environments
L1 = Low Sensitivity for noisy environments
T82.book Page 6 Wednesday, March 28, 2018 1:28 PM