Motorola Talkabout T5300, Руководство пользователя

Страница: 19 / 36

15
T
a
lking an
d Listening
Channel
• With radio On, press
\
, Current Channel will begin to flash.
• Use
[
and
]
to change Channel while flashing.
• Press
M
to set new Channel.
Interference Eliminator Code (T5400 Only)
The interference eliminator codes help minimize interference by
providing you with a choice of code combinations.
•
To set the code, press
\
until the code display begins to blink.
• Then press
[
or
]
to set the code.
• Press
M
to save the code setting.
You must set the Interference Eliminator Code to
0
on a T5400 to communicate with
a T5300.
You can specify a different code for each channel. To set a channel and code
combination, press
\
and then press
[
or
]
to select the channel. Press
\
again and then press
[
or
]
to select a code. Press
M
to exit the menu and to
save the channel and code combination. To set another channel and code
combination, repeat these steps.
Volume
• Rotate
P
while holding down
Q
until you reach a comfortable listening level.
• Rotate
P
clockwise to increase and counter-clockwise to decrease volume.
6864110r09o.book Page 15 Friday, December 21, 2001 12:04 PM