Motorola T193 Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 57

Motorola T193 Скачать руководство пользователя страница 5

6881038B70

July 27, 2001

1

Level III Service Manual Introduction

Introduction

Motorola

®

Inc. maintains a worldwide organization that is dedicated to provide

responsive, full-service customer support. Motorola products are serviced by an
international network of company-operated product care centers as well as autho-
rized independent service firms.

Available on a contract basis, Motorola Inc. offers comprehensive maintenance and
installation programs which enable customers to meet requirements for reliable,
continuous communications.

To learn more about the wide range of Motorola service programs, contact your local
Motorola products representative or the nearest Customer Service Manager.

Product Identification

Motorola products are identified by the model number on the housing. Use the entire
model number when inquiring about the product. Numbers are also assigned to
chassis and kits. Use these numbers when requesting information or ordering
replacement parts.

Product Names

Product names included in Product Families B95 and C21 (PF B95 and C21)
telephones are listed on the front cover. Product names are subject to change
without notice. Some product names, as well as some frequency bands, are available
only in certain markets.

Product Changes

When electrical, mechanical or production changes are incorporated into Motorola
products, a revision letter is assigned to the chassis or kit affected, for example; -
A, -B, or -C, and so on.

The chassis or kit number, complete with revision number is imprinted during
production. The revision letter is an integral part of the chassis or kit number and
is also listed on schematic diagrams and printed circuit board layouts.

Regulatory Agency Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to the
following conditions:
1.

This device may not cause any harmful interference, and

2.

this device must accept interference received, including interference that may
cause undesired operation.

This class B device also complies with all requirements of the Canadian Interfer-
ence-Causing Equipment Regulations (ICES-003).

Cet appareil numérique de la classe B respecte toutes les exigences du Règlement
sur le matériel brouilleur du Canada.

1 and 2

B95 and C21
6881038B70

«
...
3
4
5
6
7
...
»

Содержание T193


























































Отзывы:

Нет отзывов